Save $1,001

Digital CO2 Gas Controller with humidifier

Availability:

In stock


Compare

CO2 Gas Mixer for 0-20% comes with a humidifier

In stock

$2,999.00 $4,000.00

Balanced CO2 content inside the incubator not only controls pH of cell media, but also brings the gas consumption to the minimum.

Designed for live cell imaging and time-lapsed microscopy.

The controller is used to deliver gas mixture inside any custom enclosure and  miniature incubators.

For use with any custom enclosure and  miniature incubators, to regulate CO2 level from 0 to 5% (optional range 0-20%)

  • Designed for live cell imaging and time-lapsed microscopy.
  • For use with any custom enclosure and  miniature incubators, to regulate CO2 level from 0 to 5% (optional range 0-20%).
  • Connects to a cylinder with compressed CO2 gas. The output connects directly to a gas port of the incubator or to a humidifier.
  • Can provide up to 225 cm3/sec gas flow, which is enough to make 5% CO2 in 4.5l enclosure in 1sec.
  • The controller continuously senses CO2 concentration inside the incubator through CO2-UP attachment, which is small enough (69x29x25mm) to be placed inside custom enclosures. It can be also attached from outside.
  • CO2 control at 5% level keeps pH of media constant.
  • Simple to use
  • the controller ships calibrated for 5% level requirement (other CO2 ranges and higher flow output are available on request).
  • Can be adjusted to fill incubators of different volumes (and custom chambers).
  • The instrument not only controls gas content inside the incubator, but also brings the gas consumption to the minimum.

Digital CO2 Gas Mixer

Designed for live cell imaging and time-lapsed microscopy. For use with any custom enclosure and  miniature incubators, to regulate CO2 level from 0 to 5% (optional range 0-20%).  Connects to a cylinder with compressed CO2 gas. The output connects directly to a gas port of the incubator or to a humidifier. Can provide up to 225 cm3/sec gas flow, which is enough to make 5% CO2 in 4.5l enclosure in 1sec. The controller continuously senses CO2 concentration inside the incubator through CO2-UP attachment, which is small enough (69x29x25mm) to be placed inside custom enclosures. It can be also attached from outside. CO2 control at 5% level keeps pH of media constant. Simple to use: the controller ships calibrated for 5% level requirement (other CO2 ranges and higher flow output are available on request). Can be adjusted to fill incubators of different volumes (and custom chambers). The instrument not only controls gas content inside the incubator, but also brings the gas consumption to the minimum. Note: if using pre-mixed 5%CO2/95%O2 gas source – a different PC-MI controller is required.

Required accessories: a source of CO2 gas, CO2-UP upgrade, miniature incubator.

SKU: CO2-controller Categories: , , ,
Input:max 300PSI
Output:max 25PSI / 225cm3/sec gas flow
Connectors:Push-to-connect:

INPUT for 5/32in. (4mm) O.D. tubing (included);

OUTPUT for 1/8in O.D. tubing (included);

can be replaced with any 10-32 threaded connectors;

includes luer fitting for different size tubing;

includes easy-disconnect coupling for 1/4in. O.D. tubing

Indicators:CO2 LOW, output CLOSE
Controls:manual CO2 level 0-5% (optional 0-20%)

INPUT PRESSURE regulator 0-25PSI,

CLOSE switch,

CLOSE TTL input (+5V), FEEDBACK gains

Monitor:Digital display

ANALOG BNC 0-5% CO2 – 0-2.5V output

Dimensions:6 x 2.5 x 9in. controller

69x29x25mm – upgrade attachment

Power:Includes external 120/230VAC power supply

Premixed (5% CO2 / 95% Air) Gas Controller with humidifier

A humidifier CO2-500ML is included;

The package also incldues the CO2 Upgrade for Miniature Incubators – connects to CO2 Controller. Can be used with custom chambers.

Heated Humidifier is included. When passed through heated water, CO2 mixture becomes humid. Can be also used as an indicator of gas flow – bubbles will indicated gas flowing inside the incubator. Connects inline between the controller and the incubator.

Required accessories: a source of CO2 gas, miniature incubator.

Premixed (5% CO2 / 95% Air) Gas Controller with humidifier

Premixed (5% CO2 / 95% Air) Gas Controller with humidifier

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Get Discounts!
Enter your email to get the most updated imaging news and discount on your first purchase:
Submit
We won't spam, Give it a try!
close-link