BIOIMAGER offers a range of heating and freezing microscope stages for both OEM and end users to visualize and explore materials properties. Used in conjunction with light microscopes, raman, IR and other forms of spectroscopy, Linkam stages are found in thousands of laboratories worldwide with the most successful heating/freezing stage, the THMS600, selling over 3000 units alone.
|A: -196 to 120’C|
B: -196 to 350’C
C: -196 to 420’C
D: -196 to 600’C
|E: -40 to 120’C|
F: -20 to 120’C
|G: Ambient to 1000’C|
H: Ambient to 1200’C
I: Ambient to 1200’C
LTS420: -196 to 420’C
The LTS420 hotstages are optimised for isothermal sample analysis applications where high speed heating and cooling are compromised by larger sample area with excellent thermal stability of less than 0.1C.
The LTS420 is an easy to use, versatile heating and freezing stage. The stage consists of a large area temperature controlled element with a platinum resistor sensor embedded close to the surface for accurate temperature measurements.
The sample is simply mounted on a standard microscope slide in direct contact with the heating element and can be manipulated 15mm in X and Y direction. The sample chamber is gas tight and has gas valves to purge with either inert gas or humidity.
- Temperature Range -196°C to 420°C
- Sample area of 53.5x43mm
- 32 Ramp temperature profile programming
- 15mm XY manipulation as standard
- Sample holder for standard 76x26mm microscope slides
- Quick-release gas valves for atmospheric control
- Swing out lid for easy sample loading
- Can be used with transmitted or reflected light
- Mounts directly to microscope table or substage
- Stage body size: 166x90x24mm
- 100 Ohm platinum sensor
- Temperature stability <0.1°C
- Inner lid to increase temperature stability
- Direct injection of coolant into block
- Highly conductive metal for improved heat transfer
- Minimum Heating Rate 0.01°C/min
- Maximum heating rate of 50°C/min
- Response time of <1 second at 5°C/min at 50°C
- Objective lens minimum working distance: 6mm
- Condenser lens minimum working distance: 13.2mm
Larger Viewing Windows
The LTS stages are now available with larger viewing windows. The standard 18mm viewing aperture can now be increased to up to 50mm. We have both 35mm and 50mm viewing apertures available upon request.