Designed for live cell imaging and time-lapsed microscopy.For use with standard multi-well plates. Optional inserts allow you to use: TC-I-3 – slides and chambered coverglasses (x3), and TC-I-4 – Petri dishes (x4). The insert for Petri dishes can be used with four coverslip holders. Incorporates luer-lock port for gas mixture (to control CO2 or hypoxia), and heated cover (purchased separately) to prevent condensation. Built-in multiple ports for tubing and accessories (probes and sensors). Fits all brands of motorized stages and type K Zeiss stages. Can be used with a set of adjustable tubing holders NH-MIS to position perfusion tubing for continuous media exchange. Requires a temperature controller. Can be upgraded with an objective heater for immersion optics. The whole bottom is open for access with objective (for closed heated bottom incubator – consider another model). Can be used for long-term imaging.
BIA-XYS-180 Universal Manual XY Stage for Stereo Microscopes
$USD 399.00
Universal ThermoPlate of glass/ T-25 /T-75 Flasks for Zeiss, Leica, Olympus or Nikon Microscopes
Universal ThermoPlate of well-plates for Inverted Zeiss, Leica, Olympus & Nikon Microscopes
$USD 1,995.00
-24%- Miniature Incubator for multi-well plates, dishes and slides
- Standard Microscopes, Zeiss, Nikon, Olympus, Huvitz, Meiji Techno, Motic etc
- Stage: to fit Microscope motorized stages Ludl, Prior, ASI, Marhauser, type K stages from Zeiss, ThorLabs, and Nikon stages
- Includes two-channel temperature controller
Miniature Incubator for well-plates, dishes & slides
- Designed for live cell imaging and time-lapsed microscopy.
- For use with standard multi-well plates.
- Optional inserts allow you to use: TC-I-3 – slides and chambered coverglasses (x3), and TC-I-4 – Petri dishes (x4).
- The insert for Petri dishes can be used with four coverslip holders.
- Incorporates luer-lock port for gas mixture (to control CO2 or hypoxia), and heated cover (purchased separately) to prevent condensation.
- Built-in multiple ports for tubing and accessories (probes and sensors).
- Fits all brands of motorized stages and type K Zeiss stages.
- Can be used with a set of adjustable tubing holders NH-MIS to position perfusion tubing for continuous media exchange.
- Requires a temperature controller (Included, see below).
- Can be upgraded with an objective heater for immersion optics.
- The whole bottom is open for access with objective (for closed heated bottom incubator – consider another model).
- Can be used for long-term imaging.
High stability, no noise Precision Temperature Controller TC-1-100-I to operate miniature incubators
- Easy to use and flexible controls for stable operation.
- Independent second channel for the incubator lid.
- Plastic-encapsulated external probes (optional): no metal ions leakage into solutions
- Stability 0.01°C
- Built-in overheating protection
- Analog and RS232 Inputs for programmed temperature changes
- Analog Outputs to monitor temperature
- No vibrations during imaging and recording – no internal fan.
Miniature Incubator for multi-well plates, dishes and slides, to fit Microscope motorized stages Ludl, Prior, ASI, Marhauser, type K stages from Zeiss, ThorLabs, and Nikon stages
Summary
- Miniature Incubator for multi-well plates, dishes and slides
- Standard Microscopes, Zeiss, Nikon, Olympus, Huvitz, Meiji Techno, Motic etc
- Stage: to fit Microscope motorized stages Ludl, Prior, ASI, Marhauser, type K stages from Zeiss, ThorLabs, and Nikon stages
- Includes two-channel temperature controller
1. Miniature Incubator
Designed for live cell imaging and time-lapsed microscopy. For use with standard multi-well plates. Optional inserts allow you to use: TC-I-3 – slides and chambered coverglasses (x3), and TC-I-4 – Petri dishes (x4). The insert for Petri dishes can be used with four coverslip holders. Incorporates luer-lock port for gas mixture (to control CO2 or hypoxia), and heated cover (purchased separately) to prevent condensation. Built-in multiple ports for tubing and accessories (probes and sensors). Fits all brands of motorized stages and type K Zeiss stages. Can be used with a set of adjustable tubing holders NH-MIS to position perfusion tubing for continuous media exchange. Requires a temperature controller. Can be upgraded with an objective heater for immersion optics. The whole bottom is open for access with objective (for closed heated bottom incubator – consider another model). Can be used for long-term imaging.
|
for well-plate |
for 4 35mm petri-dishes |
for glass slide or slide chambers |
|
for perfusion 35mm petridishes without lid |
for perfusion 35mm petridishes with lid |
2. High stability, no noise Precision Temperature Controller TC-1-100-I to operate miniature incubators
Easy to use and flexible controls for stable operation. Independent second channel for the incubator lid.
Plastic-encapsulated external probes (optional): no metal ions leakage into solutions
Stability 0.01°C
Built-in overheating protection
Analog and RS232 Inputs for programmed temperature changes
Analog Outputs to monitor temperature
No vibrations during imaging and recording – no internal fan.
1. Miniature Incubator for standard microscopes to use with slides and petri dishes
| Specifications: | |
| Stability: | 0.1°C |
| Outside dimensions: | fits 160x110mm cutout of motorized stages; the bottom is recessed 10mm below the top surface of motorized stages (7mm below the mounting surface, comes with 3mm spacers to reduce this recessed profile to 5mm), and can be leveled by set screws positioned in the corners of the incubator base |
| Optical aperture and clearance: | 112x72mm; 34mm from sample to top surface; 24mm (19mm inside clearance) for low-profile option; optional spacers allow to elevate the top surface 9.5mm – to provide more space inside the incubator |
| Use with: | Standard multi-well plates, 35mm dishes, and 1x3in. glass coverglasses/slides |
| Condensation free lid: | Uses a built-in temperature sensor to connect independently to the second channel of temperature controllers, 81x121mm optical window |
| CO2 port: | Luer-lock connector to a source of gas mixture. |
| Water reservoir: | Controls humidity. Can be replenished through outside ports. |
| Media exchange and perfusion: | Multiple sealed inflow/outflow ports, a set of optional adjustable tubing holders to position inflow and outflow tubing inside sample chambers. |
2. High stability, no noise Precision Temperature Controller BTC-1-100-I to operate miniature incubators
| Specifications: | |
| Range: | up to 150°C with accuracy 0.1°C |
| Temperature probe: | miniature 0.87mm diameter (optional) |
| Stability: | 0.01°C, required for sensitive applications: nano/piezo positioning, confocal imaging for example |
| Settings: | allow to stabilize temperature in different sample volumes and heating stage sizes |
| Feedback: | Stage sensors, built-in in the base and the lid |
| Input: | 100-240VAC |
| Dimensions: | 7x4x10.5in. |
- Designed for live cell imaging and time-lapsed microscopy.
- For use with standard multi-well plates, slides and chambered coverglasses (x3), Petri dishes (x4).
- The insert for Petri dishes can be used with four coverslip holders.
- Fits all brands of motorized stages and type K Zeiss stages.
Only logged in customers who have purchased this product may leave a review.
Related products
-
-
-
-
$USD 7,565.00 Add to cart
Reviews
There are no reviews yet.