Save $1,020

BIC-C40D sCMOS 4MP 1.2″ 6.5μm/pixel Microscope Camera with external trigger


  • Scientific CMOS / sCMOS Camera
  • 1.2″ Sensor, 4MP (2048×2048) Monochrome
  • 6.5 μm/pixel
  • 2e- Readout Noise
  • 85dB dynamic range
  • Progressive Scan Mode
  • Perfect 16bit color reproduction
  • External triggering
  • Peltier Cooled Device
  • USB3.0-Faster data transmission
  • C-Mount port

$6,980.00 $8,000.00

High Sensitivity Color sCMOS Sensor

Some opportunities are fleeting, but should not be missed.
 
As a result of the breakthrough performance of the scientific grade color CMOS sensor, the BIC-C40D produces perfect images in very low light conditions, allowing for vastly reduced exposure times and corresponding high frame rates, whilst maintaining the richness of the image detail information.
  • 2e- Readout Noise
  • 1.2 inch-larger field of view
  • Perfect 16bit color reproduction
  • Outstanding color, with unique user control
  • 16 bit ISP image processor
  • Peltier Cooled Device
  • USB3.0-Faster data transmission

BIC-C40D 1.2″ 4MP Monochrome sCMOS Microscope Camera

BIC-C40D 4MP 1.2" 6.5μm/pixel Monochrome sCMOS Microscope Camera with external triggerLow Readout Noise

Through with superb large pixel size 6.5µm×6.5µm, the BIC-C40D only has low to 1.5e readout noise. Regarding with the readout noise per unit area of each pixel, BIC-C40D has the lowest noise than all the CCD and sCMOS cameras in the market. BIC-C40D offers truly extraordinary signal to noise ratio.

High Signal-to-Noise Ratio

The BIC-C40D shows dramatically higher SNR performance over the cooling CCD at any amount of incoming photons. If the number of photons is over the crossover point at 8 photons, the SNR of BIC-C40D also outperforms the EMCCD.

High Dynamic Range

85dB dynamic range and 16 bit digital signal presents ultra-low signals and strong signal simultaneously. You can take images under any complicated light environment.

High Frame Speed

 By USB 3.0 data transfer technology, the frame speed reaches 25 fps at 2048×2048 resolution. BIC-C40D has the capability to capture fast-moving object images.

Excellent Quantum Efficiency

The BIC-C40D extends the remarkable photo-electric conversion range from 470 nm to 750 nm, in which the quantum efficiency is over 50% to even 60%. If you need high QE application, we can supply “black illuminated” BIC-C40B for you, the camera will has UV detect capability and >85% QE at 600 nm.

 

Technical Specifications

Model BIC-C40D
Sensor size 1.2″
Color/monochrome Color
Pixel size (μm) 6.5μm x 6.5μm
Effective pixels 4MP
Max. Resolution (H×V) 2048 x 2048 (HxV)
Effective Area 13.3 x 13.3 mm
Full well capacity 30,000e-
Shutter Rolling shutter
Frame rate [email protected] resolution
Read noise 2e-
Shutter type Rolling Shutter
Exposure mode Auto/Manual
Exposure time 0.021ms-10s
Cooling method Peltier cooling
Cooling temperature Forced air (Ambient at +25’C):-10’C
Dark current 0.6 electrons/pixel/s (0‘C)(typ.)

0.35 electrons/pixel/s (-10’C)(typ.)

Dynamic range 85dB
Sub-array Available
External trigger mode Standard / Synchronous / Global trigger
Trigger delay function 0-10s (1μs steps)
Trigger output 3 programmable timing outputs (Exposure/Global/readout signal)
External trigger routing HIROSE connector
Digital interface USB3.0
SDK Support
Bit depth 16 bit
Lens mount C-mount
Power supply 12V/8A
Power consumption 50W
Camera size 120 x 119 x 121(mm)
Parameter settings White balance, Exposure, 3D denoise, Gamma, Gain, Contrast, Saturation, Flat fielding, Auto level
PC software Mosaic/LabVIEW/Matlab/Micromanager
Compatible system Windows is supported and Linux/Mac is under development
Operating temperature 0-60’C
Operating humidity 10%-85% RH

 

Model BIC-C40D
Sensor size 1.2″
Color/monochrome Color
Pixel size (μm) 6.5μm x 6.5μm
Effective pixels 4MP
Max. Resolution (H×V) 2048 x 2048 (HxV)
Effective Area 13.3 x 13.3 mm
Full well capacity 30,000e-
Shutter Rolling shutter
Frame rate [email protected] resolution
Read noise 2e-
Shutter type Rolling Shutter
Exposure mode Auto/Manual
Exposure time 0.021ms-10s
Cooling method Peltier cooling
Cooling temperature Forced air (Ambient at +25’C):-10’C
Dark current 0.6 electrons/pixel/s (0‘C)(typ.)

0.35 electrons/pixel/s (-10’C)(typ.)

Dynamic range 85dB
Sub-array Available
External trigger mode Standard / Synchronous / Global trigger
Trigger delay function 0-10s (1μs steps)
Trigger output 3 programmable timing outputs (Exposure/Global/readout signal)
External trigger routing HIROSE connecter
Digital interface USB3.0
SDK Support
Bit depth 16 bit
Lens mount C-mount
Power supply 12V/8A
Power consumption 50W
Camera size 120 x 119 x 121(mm)
Parameter settings White balance, Exposure, 3D denoise, Gamma, Gain, Contrast, Saturation, Flat fielding, Auto level
PC software Mosaic/LabVIEW/Matlab/Micromanager
Compatible system Windows is supported and Linux/Mac is under development
Operating temperature 0-60’C
Operating humidity 10%-85% RH

Based on 0 reviews

0.0 overall
0
0
0
0
0

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Get Discounts!
Enter your email to get the most updated imaging news and discount on your first purchase:
Submit
We won't spam, Give it a try!
close-link